Low Attenuation Homogeneous Structure For Mobile Communication 3D-FB Coxial Cable
Use Range: operating frequency range is generally between 100MHz ~ 3000MHz. It is mainly used in the wired transmission portion of the mobile communication, cellular telephones, microwave transmission, radio communication, broadcasting system, and a connection between the base station transmit antenna and a receiver or a wireless communication device.
Reference standard:MIL-C-17
Type of coaxial cable:3D-FB, RoHS compliance | |||||
Main Electrical properties: | |||||
Characteristic impedance | 50±2Ohm | ||||
Rated capacitance | 96±2 pf/m | ||||
Velocity | 66% | ||||
Delay | 4.90ns/m | ||||
Operating frequency | 400~2500MHz | ||||
Attenuation at typical frequencies:(dB/ m) | |||||
400MHz | 900MHz | 1800MHz | 2500MHz | ||
0.293 | 0.431 | 0.685 | 1.08 | ||
VSWR 400~2500MHz | 1.20Max. | ||||
Mechanical Construction: | |||||
Inner conductor: CCS | 0.90±0.02mm | ||||
Dielectric:PE | 2.95±0.03mm | ||||
Outer conductor: AA+AP | 16*7/0.12±0.01mm | ||||
Jacket :PVC Black | 5.30±0.15mm | ||||
CCS—copper clad steel,AA--aluminum alloy wire | |||||
Engineering data: | |||||
Maximum Pull Tension | 38 Ibs | ||||
Minimum bending radius | 75mm | ||||
Operating temperature | -20~+70°C | ||||
jacket-Marking | Hong Feng 3D-FB coaxial cable | ||||
Attenuation(@20℃) | ||
Frequency (MHz) | Max Attenuation (dB/100FT) | Max Attenuation (dB/100M) |
100 | 3.2 | 10.4 |
150 | 4.0 | 13.0 |
280 | 5.3 | 17.5 |
350 | 5.9 | 19.5 |
400 | 6.6 | 21.5 |
800 | 9.2 | 30.2 |
900 | 9.7 | 31.8 |
1200 | 11.3 | 37.2 |
1500 | 12.6 | 41.5 |
1800 | 13.9 | 45.6 |
1900 | 14.3 | 46.8 |
2000 | 14.7 | 48.2 |
2200 | 15.4 | 50.6 |
2500 | 16.5 | 54.0 |
